Auto-Generated Summary
> Provide an extensive
summary of the agreements by topic. No need to mention CRs.
Extensive Summary of Agreements by Topic
SRS Carrier Switching
- Simultaneous SRS Carrier Switching: Two SRS carrier
switches are considered simultaneous if their transmissions overlap in
time. UE
capability signaling is reused, and UEs not capable of simultaneous
switching are not expected to be configured for it.
- Switching Time: Required switching time depends on
UE capability and operation state.
Prioritization rules in TS 38.214 Sec.
6.2.1.3 are applied, and no spec change is needed.
HARQ Process Numbers
- Maximum HARQ Processes: Support up to 32 HARQ
process numbers for TN in FR1 and FR2-1 in Rel-19.
- New RRC Parameters: Introduced parameters for HARQ
process numbers (e.g., harq-ProcessNumberSizeDCI-0-1-Ext-r19) with
specific value ranges.
- Layer Configuration: Parameters can only be
configured when the maximum number of layers for PDSCH/PUSCH is up to 4.
UE Capabilities
- CSI-RS Reception: Define a new UE capability to
count CSI-RS ports within one resource as a single resource, even if
referred by multiple report settings.
- SRS Frequency Hopping: Extend Rel-18’s UL frequency
hopping for positioning to non-RedCap UEs in a single carrier. UE capability for
this feature is introduced.
- PDCCH Monitoring: Introduce UE capability and RRC
parameters to enable/disable monitoring based on designated SSSG index.
SRS Beamforming and Antenna Switching
- Enhancement of SRS Beamforming: Improvements for
FR2 positioning were discussed, including antenna switching pattern
reporting.
- SRS Frequency Hopping: UEs are expected to perform
frequency hopping for positioning based on higher layer parameters,
subject to UE capability.
Link Adaptation
- Enhancements: Proposals for improving link
adaptation were discussed, including handling ambiguities with SRS carrier
switching.
MBMS Support
- Cell Acquisition Signals: Non-MBSFN subframes
containing acquisition signals in MBMS-dedicated cells are transmitted
within specific time intervals.
New parameters (n and k) are introduced for configuration.
UL Frequency Hopping
- Non-RedCap UEs: Extend UL frequency hopping for
positioning to non-RedCap UEs.
Liaison sent to RAN2 to discuss potential new parameters.
Concurrent Configuration of SRS-CS and UL Tx Switching
- Prioritization Rules: Confirm prioritization rules
between target and source CCs, with no spec change needed.
- Switching Time: Switching time depends on UE
capability and operation state, with specific rules for simultaneous
transmission.
Counting of Active NZP-CSI-RS Resources
- Proposal: Counting of active NZP-CSI-RS resources
was discussed, involving multiple stakeholders (e.g., Nokia, Apple,
Ericsson).
CDM DMRS Port Allocation
- Enhancements: Improvements in DMRS port allocation
combinations for enhanced uplink and downlink performance were proposed.
Miscellaneous
- UE Frequency Hopping for Positioning: Extend
Rel-18’s UL frequency hopping for positioning transmission to non-RedCap
UEs.
- Muting of Always-On Signals: Proposal for muting
always-on signals for 5G Broadcast was discussed.
This summary consolidates agreements across various topics
discussed in the document.